Now with the application of quartz stone more and more widely, the market demand continues to increase, resulting in confusion in the quartz stone market, the quality is uneven, and the problems exposed are gradually obvious. If the quartz stone countertop is installed and used for a period of time, there will be a fracture or obvious cracks, the reason for such a situation is multi-faceted. Therefore, acceptance after installation is crucial, whether the installation is in place is related to whether the cabinet is beautiful, but also to whether the future use is satisfactory.
Quartz stone has become a synonym for cabinet countertops, and quartz stone has gradually occupied the entire countertop market with its own excellent performance in many countertop materials. Quartz stone is rich in color, smooth and dense surface can be comparable to natural marble, quartz stone belongs to artificial stone plate can be used in a large area without color difference, compared with natural stone has a certain plasticity.
Here is to tell you about the quartz stone cabinet countertop acceptance standards
1, color difference: the same type of color quartz stone, due to different factory time there will be a certain degree of color difference, we must pay attention to comparison when entering the table.
2, flatness: After the table is installed, be sure to check the flatness again with a level.
3, seam: if the table is installed after you can clearly see the glue line of the seam, or you can feel the obvious misseam by hand, it means that the seam is definitely not done.
4, opening: the sink on the table and the location of the stove need to open holes, the opening edge should be smooth, can not have a zigzag shape; The four corners should be made in a certain arc, not a simple right Angle, and should be specially reinforced. It is best to avoid choosing field opening.
5, back water: In order to prevent the table water to the back of the cabinet, so, the table against the wall, must be turned over to form a water block. It should be noted that the upturn must have a smooth arc, rather than a right Angle, otherwise it will leave a dead corner that is difficult to clean.
Chinese 
English